True vertical depth control and geo-steering in extended reach wells requires the use of MWD technology for proper well placement. With measured depths exceeding 20,000 feet, reliable MWD telemetry can be a challenge. The TeleDrill pulser produces programmable pulse amplitudes as high as 900 psi; easily decoded even from these extreme depths.

Tool face and gamma ray information can be telemetered to surface rapidly; every 7 seconds and 30 seconds respectively, facilitating directional drilling and optimizing well placement.

Scalable to any size, the TeleDrill Pulser can be utilized in all small diameter applications. In coiled tubing completion applications the pulsing motion eliminates coil lock-up, resulting in improved weight transfer for faster milling and allowing reach to the toe of the well, ensuring all plugs are milled.

Contact us for more information on a custom solution.

In horizontal well applications the TeleDrill Pulser overcomes drilling inefficiencies such as stick slip, friction, and ledges through its patented axial thrusting motion.
Full weight transfer to the bit provides for consistent downhole motor torque and tool face orientation, allowing the directional driller better control of the bottom hole assembly, resulting in less cost per foot drilled.